FPGA boards

FPGA Device

• Cyclone V SoC 5CSEMA5F31C6 Device
• Dual-core ARM Cortex-A9 (HPS)
• 85K Programmable Logic Elements
• 4,450 Kbits embedded memory
• 6 Fractional PLLs
• 2 Hard Memory Controllers

Switches, Buttons and Indicators

• 4 User Keys (FPGA x4)
• 10 User switches (FPGA x10)
• 11 User LEDs (FPGA x10 ; HPS x 1)
• 2 HPS Reset Buttons (HPS_RST_n and HPS_WARM_RST_n)
• Six 7-segment displays

Board documentation

FPGA Device

• Intel Cyclone® V SE 5CSEBA6U23I7NDK device (110K LEs)
• Serial configuration device  – EPCS64 (revision B2 or later)
• USB-Blaster II onboard for programming; JTAG Mode
• HDMI TX, compatible with DVI 1.0 and HDCP v1.4
• 2 push-buttons
• 4 slide switches
• 8 green user LEDs
• Three 50MHz clock sources from the clock generator
• Two 40-pin expansion headers
• One Arduino expansion header (Uno R3 compatibility), can be connected with Arduino shields
• One 10-pin Analog input expansion header (shared with Arduino Analog input)
• A/D converter, 4-pin SPI interface with FPGA

Board documentation

FPGA Device

• MAX 10 10M50DAF484C7G Device
• Integrated dual ADCs, each ADC supports 1 dedicated analog input and 8 dual function pins
• 50K programmable logic elements
• 1,638 Kbit M9K Memory
• 144 18 × 18 Multiplier
• 4 PLLs

Switches/Buttons/LEDs/7-Segment Display

• 10 LEDs
• 10 Slide Switches
• 2 Push Buttons
• Six 7-Segments Display

Board documentation

FPGA Device

• Cyclone V SX SoC—5CSXFC6D6F31C6N
• 110K LEs, 41509 ALMs
• 5,761 Kbits embedded memory
• 6 FPGA PLLs and 3 HPS PLLs
• 2 Hard Memory Controllers

Switches, Buttons and Indicators

• 5 User Keys (FPGA x4, HPS x1)
• 10 User Switches (FPGA x10)
• 11 User LEDs (FPGA x10 ; HPS x 1)
• 2 HPS Reset Buttons (HPS_RST_n and HPS_WARM_RST_n)7-Segment Display x6 

Board documentation

Cyclone® IV EP4CE22F17C6N FPGA

• 22,320 Logic elements (LEs)
• 594 Embedded memory (Kbits)
• 66 Embedded 18 x 18 multipliers
• 4 General-purpose PLLs
• 153 Maximum FPGA I/O pins 

Board documentation

FPGA Device

• MAX 10 10M50DAF484C6G Device
• Integrated dual ADCs, each ADC supports 1 dedicated analog input and 8 dual function pins
• 50K programmable logic elements
• 1,638 Kbit M9K Memory
• 5,888 Kbits user flash memory
• 144 18 × 18 Multiplier
• 4 PLLs
• Programming and Configuration
• On-board USB Blaster
• Optional JTAG direct via 10-pin header
• One slide switch for dual boot image selection

Switches, Buttons and LEDs

• Five push-buttons
• Ten slide switches
• Ten red user LEDs
• Two 7-segment displays

Board documentation

FPGA

• XC7A100T-1CSG324C

I/O Interfaces

• USB-UART for programming and serial communication
• One 10/100 Ethernet
• USB OTG 2.0
• USB-UART bridge
• 12-bit VGA output
• 3-axis accelerometer
• PWM audio output
• Temperature sensor
• PDM microphone
• USB HID Host for mice, keyboards and memory sticks

Switches and LEDs

• 16 Slide switches
• 16 LEDs
• 2 tri-color LEDs
• 5 Push-buttons

Board documentation

Key Features and Benefits

• One Pmod connector with 8 Digital I/O
• 48-pin DIP connector with 44 Digital I/O and 2 Analog inputs (0-3.3V)
• 2 Push Buttons
• 1 RGB LED
• 2 LEDs
• USB-UART bridge
• Powered from USB or external 3.3-5.5V supply connected to DIP pins
• USB-JTAG Programming Circuitry
• 4MB Quad-SPI Flash
• 512KB SRAM with an 8-bit bus and 8ns access times
• 5 clock management tiles
• 225 KB Block RAM
• 41,600 Flip-flops
• 20,800 LUTs
• Quad-SPI Flash/JTAG programming options
• 1 MSPS On-chip ADC
• FPGA: XC7A35T-1CPG236C

Board documentation

Key Features and Benefits

• 4 Pmod ports: 3 Standard 12-pin Pmod ports, 1 dual purpose XADC signal / standard Pmod port
• 4-digit 7-segment display
• 5 user pushbuttons
• 16 user LEDs
• 16 user switches
• USB HID Host for mice, keyboards and memory sticks
• 12-bit VGA output
• USB-UART Bridge
• Serial Flash
• Free WebPACK™ download for standard use.
• Designed Exclusively for Vivado Design Suite. Expanded features are available through purchase of the Design Edition.
• Digilent USB-JTAG port for FPGA programming and communication
• On-chip analog-to-digital converter (XADC)
• Internal clock speeds exceeding 450 MHz
• 90 DSP slices
• Five clock management tiles, each with a phase-locked loop (PLL)
• 1,800 Kbits of fast block RAM
• 33,280 logic cells in 5200 slices (each slice contains four 6-input LUTs and 8 flip-flops)
• Features the Xilinx Artix-7 FPGA: XC7A35T-1CPG236C

Board documentation